Kobra EKP-1S-03 — open red-dot sight. It’s designed for fast aiming and sight alignment improvement, including fast moving targets, under ambient light. Used for game and other types of rifle with left-hand sight bracket.
Operation basics:
Sight reticle generated by LED, located inside the rifle. It receive signal from the scope after power-up. Reticle presented in aiming aperture.
Scope requires reticle aligning (usually single dot) with target object. Kobra red-dot has a button to adjust reticle contrast according to target.
Kobra red-dot features:
-Reticle as sharp as target.
-Aiming can be performed with both eyes open.
-If shooter’s sightline shifts from optical axis, but stays in sight port reticle will stay on target showing the exact point of impact.
-Reticle type and backlight brightness are adjustable. Settings stored in internal memory after power-off.
-Distance and wind correction by special knobs.
-Knobs are covered with protective caps with 16 marks (required for distance setting change).
Kobra Red-Dot is sealed, dust and water protected. Threaded fixtures are secure for operation safety. To keep all these advantages scope shall be repaired in authorized service center.
Scope mounting.
Step-by-step manual:
-Move scope rest aside, check that it tight against rifle.
-Turn scope from the stock to side (left) leaf.
-Turn rest 180° to the barrel. Push on the rest and remove it from the rifle.
-Sight zeroing shall be performed on distance 50-100 m with several series 4 shoots each.
Kobra Red sight is very reliable. Can withstand shooting with ammo up to 12 gauge. Device reliability proven by ease of operation, comfortable controls location, case sealing, adjustable reticle with internal memory.
Sight technical data:
Targeting distance clear-sight distance
Field of view unobstructed
Reflector optical transmission coefficient 0.6
“Single dot” reticle size (MOA) 1.8
Reticle brightness adjustment steps 16
Angular field of view from optical plane at 200 mm, 6 deg
Continuous work time with “single dot” reticle 70 hours
Operating temperature -40 to +50 degC
Dimensions 154*46*100
Weight 400 g
Number of selectable reticles 4
Power voltage 3 V
Battery type CR 2325